A bobcat is used to remove the existing driveway, if needed. The materials are then hauled away in our dump trucks.

Excavation work is done with a bobcat in order to remove any rocks, roots, very small stumps, and any other impurities that may be in the area.

In order to attain proper grade of the driveway and serve as a base to the asphalt, we lay and grade approximately four to six inches of recycled processed gravel. Once the gravel is completely graded, we will compact with our two ton vibratory roller.

Commercial grade binder asphalt is dumped from our trucks into our paving unit. Approximately two inches of binder asphalt is spread through our paving unit slightly compacting asphalt as it goes through. Once binder is complete, approximately one and half inches of top coat asphalt is spread through our paver with slight compaction. Once top coat is complete we will compact with roller.

Finally, glue and stone dust are added to the end of your driveway, which actually adheres it to the street. Stakes with caution tape are put across so that traffic will not pass through for three days.